Skip to main content

Solar tracker system with dual axis actuators

The aim of this work - researching and creating an automated system for optimal control of the solar pane with current and voltage control.
I designed and programmed two hardware-software complexes.
The first system located in the field. It is solar panel with controls and sensors.  System transmit the information wireless to the monitoring device.
Second system - monitoring device placed in a different location (200 m) and consist from a data receiver and a computer with installed software.
Transmitter

Reciever


Comments

Popular posts from this blog

Automation of shooting a physical stationary object

The photo-shooting system for the electronic museum's  materials was automated by Moskalyuk Taras - a student of the Computer Science and Technology Faculty, under the my guidance. Automation is performed using the Lego NXT technology, which significantly approximates the end of work and improves the quality of the footage. The new shooting technology allows to expand the possibilities of creating three-dimensional images, up to 180 images per model, without complicating the process of shooting and processing raw materials. Science article was written .

The thermostat in the boiler room

The complex performs automatic control of the boiler houses network  with the ability to monitor and adjust the algorithm through the global network. Consists from hardware and software parts. Includes a thermostat in the boiler room and a manager. Thermostat in the boiler room Hardware: The controller is a PC / 104 processor board (2xRS232, LPT, IDE, Ethernet, VGA, keyboard, mouse). ROM - IDE M-Systems 256 Mb flash disk. Sensors - case external temperature sensor (-40:+30°С); contact feed sensor (-5:+100°С), contact sensor of return water (-5:+100°С); Cabinet temperature sensor in the room (-5:+10°C). All sensors are built on thermistors. Analog input - self-made device (4 analog inputs 8kHz -> RS232, galvanic isolation). Discrete output - self-made device (Parallel port -> 8 relays); Power supply, housing, a set of connecting wires. Optionally - a CDMA modem with a directional antenna, a radio modem, a GSM modem, a wired telephone modem. Software : Windows NT 4.0

Successful passing the exam for an international certificate LabVIEW CLD

January 15, 2018 In Russia, the second certification test of NI LabVIEW CLD (out of three) was successfully passed . From Ukraine there is only one passed -  (but it is proved that he works in the USA). There are 17 certified spesialists in Russia. I analysed that almost of them works in industrial enterprises, and only three - in research institutes. In this context, a person from a typical technical university - is an extraordinary event. Thanks to my family for moral support.